700kW是燃氣發電機組市場中占有率高、性價比優的“黃金功率段”。在定制這一規格的機組時，采購方應核心關注模塊化擴展能力與綜合能效。700kW機組非常適合中型工業園區、大型養殖場或商業綜合體。

700kW is the "golden power range" with high market share and excellent cost-effectiveness in the gas generator market. When customizing units of this specification, the purchaser should focus on modular expansion capability and comprehensive energy efficiency. The 700kW unit is highly suitable for medium-sized industrial parks, large livestock farms, or commercial complexes.

在定制時，建議要求廠家提供標準化的集裝箱式或靜音罩殼設計，不僅便于運輸和現場快速吊裝（通常項目周期可縮短至15天左右），還能將運行噪音嚴格控制在75dB(A)以內，避免擾民。

When customizing, it is recommended to request the manufacturer to provide standardized container or silent cover designs, which not only facilitate transportation and quick on-site lifting (usually the project cycle can be shortened to about 15 days), but also strictly control the operating noise within 75dB (A) to avoid disturbing the public.

在能效與系統拓展方面，700kW機組非常適合加裝熱電聯產（CHP）模塊。定制時可要求標配缸套水與排氣雙路余熱接口，單臺機組每小時可產出約0.3噸蒸汽，用于生產加熱或冬季供暖，使綜合能效提升至85%以上。

In terms of energy efficiency and system expansion, the 700kW unit is very suitable for installing combined heat and power (CHP) modules. When customizing, it is required to have a dual channel waste heat interface for cylinder liner water and exhaust. A single unit can produce about 0.3 tons of steam per hour, which can be used for production heating or winter heating, improving the overall energy efficiency to over 85%.

此外，若未來用電負荷可能增加，應在定制時預留并聯運行接口，以便后期增加同規格機組實現并網擴容。在耗材與維保定制上，需明確機油消耗率（應低于0.3g/kW·h）及大修周期（優良機組可達30000小時以上），并要求廠家提供原廠配件價格清單，以降低全生命周期的運維成本。

In addition, if the future electricity load may increase, parallel operation interfaces should be reserved during customization to facilitate the later addition of units of the same specifications for grid expansion. In terms of consumables and maintenance customization, it is necessary to clarify the oil consumption rate (should be below 0.3g/kW · h) and overhaul cycle (high-quality units can reach more than 30000 hours), and require manufacturers to provide a list of original parts prices to reduce the operation and maintenance costs throughout the entire lifecycle.